落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高直流电压小电压测试仪(耐电孤测试仪)-(算起机掌控)

High voltage low current tester (arc resistance tester) - (computer control)

设备称谓:耐电弧试验机

Product name: electric arc resistance tester

产品设备规格:NDH-A

Product model: NDH - A

充分满足准则:GB/T 1411-2002《固状绝缘性文件耐高压得过低感应电流脉冲尖端放电的实验室检测》(同等IEC  61621-1997)及ASTM D495等标准规范的必须结构设计制造出的,并贴合IEC 149、UL 746A等实验技术

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

基本不适用领域及用途:

本应力考试机是依据应运于三相电机、电子元件和挂式电子元件等市场的水电工用金属、环氧聚酯树脂胶和隔热带性层漆等隔热带性层板材的耐焊弧焊接效能综合评价,主适用于混合物隔热带性层板材如:金属、胶片、环氧聚酯树脂、云母片、瓷质、夹层玻璃、隔热带性层油、隔热带性层漆、纸壳等有机溶剂的耐焊弧焊接效能考试;

本试验检测机由测算机控住使用,可屏幕上显示所选调查性的状态及调查性的时间,调查性结束后后并存放所选调查性参数,并可彩打.基准实践意见书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为两边成一体形式,底端为操控系統,顶部为测试箱。

2 本服务使用*新自动化操作技巧,实现取舍软件程序(IEC或ASTM)可重新进行应力测试,并在台式我的电脑显视耐压期间和效果。

3 **性顺畅,抗干挠的能力强,测试方法高精度更高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断时间间隔误差度:不低于 ±10ms

2 调压器存储容量:2kVA

3 特殊耐压试验相电压:12.5kV

4 冲击试验电压电流gps精度:±3%

5 直流电压管理准确度:±10%  电压测定定位精度:1.5%

6 电级对钢材拉伸试验负荷:(0.5±0.05)N

7 参比电极材料:钨棒

8 金属电极距离感:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 操作场景工作温度:(23±2)℃

10 食用大环境对湿度的:(50±5)%

11 交流电源:220V±5%  50Hz  10A

12 试验检测    工艺:   国家行业标准/美标/10 mA 连续式/20 mA 反复/30 mA间断/40 mA不间断

13 现场实验系统软件相应:

程序流程段

焊弧直流电压

mA

电弧放电通断耗时s

各源程序段连续时段s

测试总时长s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

连着通

60

240

5

20

间断通

60

300

6

30

累计通

60

360

7

40

维持通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序列号

英文名称

规模

备注名称

01

耐电孤测试检测设备

两台

 

02

电极材料系统的

一种

 

03

电极片支承

一套套

 

04

电源模块电览

1套

 

05

接地保护放**

一枝

 

06

交流电毫安表

一套

 

07

手提电脑测控平台

一项

 

08

钢材拉伸试验架

一套

 

09

电级空距规范标准块

2块

 

10

层面标准的块

2块

 

11

瓷器片

2片

 

12

喷墨打印图片机

1台

该品牌

13

算起机

1台

厂家

14

运行阐明书

1份

 

15

合格率证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品规格型号:

NDH-A    耐电弧焊接耐压仪-微机掌控

NDH-B    耐焊弧试验报告仪-触模屏调控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪